Page 1 of 1 1
Topic Options
Rate This Topic
#205020 - 01/12/20 08:51 PM magnum to maximum
dave thomas
member


Registered: 11/19/08
Posts: 155

Offline
with all the talk about the 357 maximum lately, is it as simple as rechambering a ruger blackhawk from 357 mag to 357 max? I know you can just recut the mag chamber on a single shot, is a revolver going to be any different?

Top
#205021 - 01/12/20 08:57 PM Re: magnum to maximum [Re: dave thomas]
KYODE
Shooting Expert


Registered: 01/18/04
Posts: 3125
Loc: Northeast Ky.

content Online
Rugers revolvers had an extended frame specific to the longer mags.
_________________________
TC ~ XP ~ Ruger

Top
#205022 - 01/12/20 09:29 PM Re: magnum to maximum [Re: KYODE]
dave thomas
member


Registered: 11/19/08
Posts: 155

Offline
thanks

Top
#205023 - 01/12/20 10:30 PM Re: magnum to maximum [Re: dave thomas]
45MAN
veteran


Registered: 08/13/17
Posts: 1571
Loc: brownsville, texas

Offline
BELLM RECHAMBERS TC 357 MAG BARRELS TO 357 MAX
_________________________
"ADAPT OR DIE". I USE ALL CAPS, NOT BECAUSE I AM YELLING, BUT BECAUSE IT IS AN OLD HABIT FROM MY ARMY DAYS, PLUS IT IS EASIER TO TYPE AND READ.

Top
#205027 - 01/13/20 06:39 AM Re: magnum to maximum [Re: 45MAN]
Whitworth
Shootist


Registered: 01/15/09
Posts: 9808
Loc: Virginia

Offline
The case at 1.6-inches is too long for the cylinder and frame.
_________________________
Max Prasac

Semper Fidelis

BIG IRON: https://www.youtube.com/watch?v=L6aXjMH5C30

Gun Digest TV's Modern Shooter: https://www.youtube.com/watch?v=nGo-KMpXPpA&t=7s


Top
#205030 - 01/13/20 01:00 PM Re: magnum to maximum [Re: Whitworth]
Mr. Bisley
journeyman


Registered: 06/18/19
Posts: 96

Offline
Max,

Can the Ruger SBH be chambered to 360 Dan Wesson? Case length is 1.4 inches and Starline makes the brass for it.

Top
#205032 - 01/13/20 02:31 PM Re: magnum to maximum [Re: Mr. Bisley]
Whitworth
Shootist


Registered: 01/15/09
Posts: 9808
Loc: Virginia

Offline
 Originally Posted By: Mr. Bisley
Max,

Can the Ruger SBH be chambered to 360 Dan Wesson? Case length is 1.4 inches and Starline makes the brass for it.


Can't see why not. The .454, .475, .500 JRH, .500 Linebaugh and .500 WE are all 1.4-inc cases. That would be cool!
_________________________
Max Prasac

Semper Fidelis

BIG IRON: https://www.youtube.com/watch?v=L6aXjMH5C30

Gun Digest TV's Modern Shooter: https://www.youtube.com/watch?v=nGo-KMpXPpA&t=7s


Top
#205040 - 01/13/20 05:39 PM Re: magnum to maximum [Re: Whitworth]
Bigbrowndog
journeyman


Registered: 05/08/15
Posts: 99
Loc: Central Texas

Offline
An easier conversion would be 357/44 Bain-Davis. You get 357max performance and it fits a standard cylinder, plus brass is easy as it?s simply 44mag brass.

Trapr
_________________________
NRA Endowment mbr.
USPSA/IPSC
U.S. Practical rifle/shotgun national team

Top
Page 1 of 1 1


Moderator:  Chance Weldon, jamesfromjersey, Gregg Richter, Gary 
Hop to:
 Portal Sidebar
Who's Online
1 registered (REDHAWK1954) and 157 anonymous users online.
Top Posters
9808
Whitworth
9608
s4s4u
9328
jamesfromjersey
7643
wapitirod
7327
TCTex.
6745
KRal
5186
Ernie
5057
Gary
4704
Tigger
4478
Franchise
4461
pab1
4397
Chance Weldon
4370
Dan B.
4124
Gregg Richter
3755
johnwilliams
  Member Hunts
Freedom Arms Break
Freedom Arms Break Open Pistol

Ten Tips for Buyin
Ten Tips for Buying Hunting Gear

   Access Requires Login

Generated in 0.037 seconds in which 0.008 seconds were spent on a total of 14 queries. Zlib compression enabled.




Copyright © 2000-2008
HandgunHunt.com, Inc.