Page 1 of 1 1
Topic Options
Rate This Topic
#193274 - 06/23/18 10:25 PM 327 FEDERAL MAG: WHAT DO YOU RELOAD WITH?
45MAN
old hand


Registered: 08/13/17
Posts: 717
Loc: brownsville, texas

Offline
I WANT TO START RELOADING FOR THE 327 FEDERAL MAGNUM. I CAN FIND LOAD INFO, BUT WHAT I AM LOOKING FOR IS WHAT DIES DO YOU RELOAD WITH, AND WHAT DIE DO YOU CRIMP WITH. ALSO, ANY THING I SHOULD WATCH OUT FOR? CAN I USE THE LEE F/C 32 H&R DIE FOR 327?
_________________________
"ADAPT OR DIE". I USE ALL CAPS, NOT BECAUSE I AM YELLING, BUT BECAUSE IT IS AN OLD HABIT FROM MY ARMY DAYS, PLUS IT IS EASIER TO TYPE AND READ.

Top
#193285 - 06/24/18 03:34 PM Re: 327 FEDERAL MAG: WHAT DO YOU RELOAD WITH? [Re: 45MAN]
jamesfromjersey Moderator
Shootist


Registered: 01/18/04
Posts: 8428
Loc: New Jersey

Offline
Rey, I load for the 32 mag and use Lee dies... I am sure the Lee factory crimp die will work on the 327 when adjusted.. Good luck
_________________________
Life member-NRA-SCI
Member-HHI #2900-HHASA #067
Colt-Ruger-Freedom Arms-and S&W Collector Assoc.s
"I have more guns then I need but not as many as I want" "Handgun hunters HAVE to be good"

Top
#193288 - 06/24/18 09:45 PM Re: 327 FEDERAL MAG: WHAT DO YOU RELOAD WITH? [Re: jamesfromjersey]
Russell
Pooh-Bah


Registered: 10/12/08
Posts: 1821
Loc: Oklahoma

Offline
Rey, I use RCBS 32mag dies adjusted for the .327, so the Lee's ought to work.
_________________________
It's not the gun, but the man behind it.

Sheriff Russell Cottle, Ret.
USMC; 1967-1970; Vietnam-'68-'69

Top
#193298 - 06/25/18 07:40 AM Re: 327 FEDERAL MAG: WHAT DO YOU RELOAD WITH? [Re: Russell]
45MAN
old hand


Registered: 08/13/17
Posts: 717
Loc: brownsville, texas

Offline
REDDING HAS A 327 CARBIDE SET THAT COMES WITH A PROFILE CRIMP DIE, AS USUAL, A LITTLE PRICEY, BUT STILL UNDER A 100 BUCKS, AND QUALITY ALL THE WAY.
_________________________
"ADAPT OR DIE". I USE ALL CAPS, NOT BECAUSE I AM YELLING, BUT BECAUSE IT IS AN OLD HABIT FROM MY ARMY DAYS, PLUS IT IS EASIER TO TYPE AND READ.

Top
#193309 - 06/26/18 01:18 AM Re: 327 FEDERAL MAG: WHAT DO YOU RELOAD WITH? [Re: 45MAN]
jamesfromjersey Moderator
Shootist


Registered: 01/18/04
Posts: 8428
Loc: New Jersey

Offline
I have Redding Profile Crimp dies in 44 - 45 and 41 and find them an excellent crimping die... No extra adjusting like the Lee... Just up or down till you get the crimp you want.....
_________________________
Life member-NRA-SCI
Member-HHI #2900-HHASA #067
Colt-Ruger-Freedom Arms-and S&W Collector Assoc.s
"I have more guns then I need but not as many as I want" "Handgun hunters HAVE to be good"

Top
#193320 - 06/26/18 10:40 PM Re: 327 FEDERAL MAG: WHAT DO YOU RELOAD WITH? [Re: jamesfromjersey]
smirker
stranger


Registered: 07/11/08
Posts: 10
Loc: Georgia

Offline
I use my Redding .32 Mag. dies for .327 mag.
_________________________
If your gonna be stupid....You better be tough!

Top
#193321 - 06/26/18 10:59 PM Re: 327 FEDERAL MAG: WHAT DO YOU RELOAD WITH? [Re: smirker]
45MAN
old hand


Registered: 08/13/17
Posts: 717
Loc: brownsville, texas

Offline
SMIRKER: THAT IS WHAT I AM LOOKING AT (I MISSPOKE EARLIER SAYING IT WAS A 327 SET) IN THE PRO SERIES LINE (EASIER TO USE IN PROGRESSIVE PRESSES). HAVE BEEN NOTICING THAT AAC#9 SEEMS TO BE THE WAY TO GO WITH POWDER AND 100gr JACKETED BULLETS.
_________________________
"ADAPT OR DIE". I USE ALL CAPS, NOT BECAUSE I AM YELLING, BUT BECAUSE IT IS AN OLD HABIT FROM MY ARMY DAYS, PLUS IT IS EASIER TO TYPE AND READ.

Top
Page 1 of 1 1


Moderator:  Chance Weldon, jamesfromjersey, Gregg Richter, Gary 
Hop to:
 Portal Sidebar
Who's Online
6 registered (rwg375, SamuelKing, Whitworth, Mech 8, s4s4u, wyote) and 105 anonymous users online.
Top Posters
9608
s4s4u
9216
Whitworth
8428
jamesfromjersey
7641
wapitirod
7327
TCTex.
6153
KRal
5055
Gary
4954
Ernie
4704
Tigger
4370
Dan B.
4286
pab1
4020
Gregg Richter
4019
Chance Weldon
3853
Franchise
3755
johnwilliams
  Member Hunts
Sika in the Rain
Sika in the Rain

A Contender Buck
A Contender Buck

   Access Requires Login

Generated in 0.037 seconds in which 0.008 seconds were spent on a total of 14 queries. Zlib compression enabled.




Copyright © 2000-2008
HandgunHunt.com, Inc.