Page 1 of 3 123>
Topic Options
Rate This Topic
#190732 - 03/20/18 10:54 AM Centerfire solids
Raptortrapper
Shooting Expert


Registered: 03/31/09
Posts: 3461
Loc: Colorado

Offline
Because of the recent bullet thread in the hunting forum, I got to thinking about solids in centerfire cartridges. Are they made for the "smaller" calibers, or are they only made for the African dangerous game calibers? I've never seen a solid for a .270 wsm, or a .308, or anything of that size. Wouldn't they be superior long range bullets in the smaller calibers?

Just curious is all. Perhaps this belongs in the "off topic" forum?
_________________________
A lot of people are like a slinky: Not much fun till you push them down the stairs!

Top
#190733 - 03/20/18 12:22 PM Re: Centerfire solids [Re: Raptortrapper]
tradmark
Gun Slinger


Registered: 06/08/10
Posts: 2755

Offline
I havent seen them. I would be interested to know though.

Top
#190735 - 03/20/18 12:43 PM Re: Centerfire solids [Re: tradmark]
JDK
enthusiast


Registered: 01/18/04
Posts: 216
Loc: Texas Hill Country

Offline
You mean FMJ bullets? There are plenty for .308, but they're usually 147ish grains. 6.5 Grendel rounds are being sold by Wolf with 100 grain steel jacketed slugs (steel cased as well). Some of the old ivory hunters used 6.5 military rifles with long (really long) heavy for caliber round nose FMJ slugs for elephant due to their great penetration. But, it seems like they're all loaded, or pulled bullets, for military calibers.
_________________________
John

But for the grace of God, there, I go.

Top
#190743 - 03/20/18 06:32 PM Re: Centerfire solids [Re: JDK]
Raptortrapper
Shooting Expert


Registered: 03/31/09
Posts: 3461
Loc: Colorado

Offline
No, not fmj bullets. Things like punch bullets.
_________________________
A lot of people are like a slinky: Not much fun till you push them down the stairs!

Top
#190768 - 03/20/18 11:33 PM Re: Centerfire solids [Re: Raptortrapper]
s4s4u
Shootist


Registered: 01/18/04
Posts: 9608
Loc: Northern MN

Offline
 Originally Posted By: Raptortrapper
No, not fmj bullets. Things like punch bullets.


There isn't much diameter in a 7mm or 30 caliber bullet for much of a meplat, at least and allow them to fly true, and a wide meplat is what makes non expanding bullets effective on game. Small diameter bullets require expansion to get their "meplat" so to speak.
_________________________
Rod, too.

Short cuts often lead to long recoveries.

Top
#190772 - 03/21/18 01:03 AM Re: Centerfire solids [Re: s4s4u]
Raptortrapper
Shooting Expert


Registered: 03/31/09
Posts: 3461
Loc: Colorado

Offline
Makes sense. Thanks!
_________________________
A lot of people are like a slinky: Not much fun till you push them down the stairs!

Top
#190774 - 03/21/18 04:46 AM Re: Centerfire solids [Re: Raptortrapper]
Walkingthemup
addict


Registered: 10/01/05
Posts: 447
Loc: this side of the black stump

Offline
Probably expensive, but are these what you had in mind? I've not used them and so can't comment on how effective they are.

http://www.woodleighbullets.com.au/products/hydrostatically-stabilised
http://www.woodleighbullets.com.au/bullet-lists/hydrostatically-stabilised
You Tube video from about the 4:00 minute mark. (Note could be all sales hype) https://www.youtube.com/watch?v=ZN9y6YvTUYk


Edited by Walkingthemup (03/21/18 04:57 AM)

Top
#190781 - 03/21/18 09:43 AM Re: Centerfire solids [Re: Walkingthemup]
Raptortrapper
Shooting Expert


Registered: 03/31/09
Posts: 3461
Loc: Colorado

Offline
That's interesting to say the least!
_________________________
A lot of people are like a slinky: Not much fun till you push them down the stairs!

Top
#190791 - 03/21/18 01:07 PM Re: Centerfire solids [Re: Raptortrapper]
Jeff460
journeyman


Registered: 12/01/17
Posts: 61
Loc: Kansas

Offline
The company that makes brass and copper bullets known as Cutting Edge Bullets, makes a Safari brand 155 solid copper bullet for 6.5mm, but none for the 7mm. I spoke to them and they tooled up to make the 6.5mm solid because a person ordered them in an amount that warranted keeping it catalogued as available. I may order some in 7mm at 165 grain or 170 grain specifications to make the 7mm a catalogued item. Anyone else interested in doing that? The 7mm-08 could be a candidate for using them and be very close to the 175 grain 7mm Mauser that WDM Karamojo Bell used to brain many hundreds of ivory carrying elephants.

Top
#190792 - 03/21/18 01:20 PM Re: Centerfire solids [Re: Walkingthemup]
s4s4u
Shootist


Registered: 01/18/04
Posts: 9608
Loc: Northern MN

Offline
 Originally Posted By: Walkingthemup
Probably expensive, but are these what you had in mind? I've not used them and so can't comment on how effective they are.

http://www.woodleighbullets.com.au/products/hydrostatically-stabilised
http://www.woodleighbullets.com.au/bullet-lists/hydrostatically-stabilised
You Tube video from about the 4:00 minute mark. (Note could be all sales hype) https://www.youtube.com/watch?v=ZN9y6YvTUYk


Wonder how well they track at long range.
_________________________
Rod, too.

Short cuts often lead to long recoveries.

Top
Page 1 of 3 123>


Moderator:  Chance Weldon, jamesfromjersey, Gregg Richter, Gary 
Hop to:
 Portal Sidebar
Who's Online
1 registered (racksmasher1) and 95 anonymous users online.
Top Posters
9608
s4s4u
9273
Whitworth
8695
jamesfromjersey
7643
wapitirod
7327
TCTex.
6326
KRal
5056
Gary
5006
Ernie
4704
Tigger
4461
pab1
4370
Dan B.
4127
Chance Weldon
4070
Gregg Richter
3975
Franchise
3755
johnwilliams
  Member Hunts
My "Dream" Bear Hu
My

Prepping Your Case
Prepping Your Cases

   Access Requires Login

Generated in 0.048 seconds in which 0.012 seconds were spent on a total of 15 queries. Zlib compression enabled.




Copyright © 2000-2008
HandgunHunt.com, Inc.