Page 1 of 2 12>
Topic Options
Rate This Topic
#188103 - 12/30/17 05:38 PM Revolver cleaning
InTim
stranger


Registered: 07/14/17
Posts: 9

Offline
I'm would like to know what the experienced revolver shooters rely on (products, tools and procedures) when they clean their guns?

Top
#188109 - 12/30/17 07:48 PM Re: Revolver cleaning [Re: InTim]
cherokeetracker
addict


Registered: 11/27/15
Posts: 456

Offline
I like to use "Eliminator" since it does not smell so strong. I use the "Special Line" Dewey brushes from Brownells, since they fit on my "Dewey" Rod. I shoot 45 caliber mostly so I got a 50 caliber brush from Cabelas for the chamber only.
I do use Tetra for when I shoot copper jacketed bullets. And or, Butches Bore Shine, is another good one.

I have not had to do this in a long time since I have not experienced any leading. But when I did,, I used a "choreBoy" copper scour pad, cut a small piece and wrapped and old brush to scour out the lead.

I do hunt west Tx some and it gets very dusty. SO I use a small paint brush to remove dust from the gun. then clean barrel and cylinder. The I lube the ratchet and base pin on Single actions. and Lube accordingly on the others. I use "Shooters Choice" red lube in a tube.
Good quality lightweight oil where needed.
But if I am going to a range session only,, I have been known to use a small amount of "Never Seize" It will withstand heat and beatings of the Big Bores. And resist wear on slides.

Collectors is a good oil to use for long term storage. I never tried any wax such as the Renaissance Wax.


Edited by cherokeetracker (12/30/17 07:50 PM)

Top
#188486 - 01/09/18 08:44 PM Re: Revolver cleaning [Re: cherokeetracker]
InTim
stranger


Registered: 07/14/17
Posts: 9

Offline
Thank you for putting in the time for a detailed answer. The oversized brush for the chamber only is something I hadn't thought of but plan on using

Top
#188488 - 01/09/18 09:38 PM Re: Revolver cleaning [Re: InTim]
longhunter
enthusiast


Registered: 10/03/13
Posts: 272
Loc: Butler, Missouri

Offline
Hoppe's and Kroil
_________________________
"The reason a dog has so many friends,He wags his tail instead of his tongue."

"I don't always listen to Black Sabbath,But when I do so do the neighbors"

Top
#188528 - 01/12/18 09:22 AM Re: Revolver cleaning [Re: longhunter]
wvhitman
old hand


Registered: 12/04/05
Posts: 788
Loc: WV

Offline
You'll see a thousand choices for inside maintainance. About all will work.
For the exterior, I discovered GunBrite from Issos (at Midway) years ago.
It's a paste that you apply, then wipe off. It cleans the surface and waterproofs it. My stainless guns look really clean before I treat them. When treated, the cloth is filthy. Blued guns are really impressive when treated.
I do all guns twice a year and before any hunting trips. Never had any surface problems.

Top
#188855 - 01/20/18 10:42 PM Re: Revolver cleaning [Re: wvhitman]
BBwheelgunner
veteran


Registered: 11/21/09
Posts: 1516
Loc: Olympic Penninsula, WA

Offline
Thanks for the tip on the GunBrite,

looks like good stuff!
_________________________
"If you are going to go through all the trouble to put a hole in something, why not make it a big one?"

Top
#188856 - 01/20/18 10:50 PM Re: Revolver cleaning [Re: BBwheelgunner]
Franchise
Shooting Master


Registered: 12/21/08
Posts: 3910
Loc: Castalia, NC

Offline
I just got some Gunbrite because Doc recommended it....my guns have NEVER been cleaner. That product is amazing!

Top
#189205 - 01/28/18 08:33 PM Re: Revolver cleaning [Re: Franchise]
InTim
stranger


Registered: 07/14/17
Posts: 9

Offline
Thank you for the tips

Top
#189211 - 01/29/18 04:48 AM Re: Revolver cleaning [Re: InTim]
BRASF0311
enthusiast


Registered: 12/12/13
Posts: 278
Loc: VIRGINIA

Offline
I've tried many of the wonder cleaners and lubes over the years and most do well, but I decided to save some money and use WD-40 to clean and white lithium grease for lube. Both of these can be found in Walmarts automotive section for under $4 a can, and they work well too. I also use a little steel wool wrapped around the bore brush to clean the chambers. I'm all for quick and easy.
_________________________
Semper Fi
Big Bore Handgun Hunter
https://www.youtube.com/channel/UCpn3FnTEBMlEhpfJ9AQhTog

Top
#189255 - 01/30/18 04:04 PM Re: Revolver cleaning [Re: BRASF0311]
Chance Weldon Administrator
Distinguished Expert


Registered: 09/20/13
Posts: 4078
Loc: Martin, Tennessee

Offline
I use Hoppe's for most of my cleaning jobs.
_________________________
Formerly TN Lone Wolf

"We are only as strong as we are united, as weak as we are divided." - J.K. Rowling

Top
Page 1 of 2 12>


Moderator:  Chance Weldon, jamesfromjersey, Gregg Richter, Gary 
Hop to:
 Portal Sidebar
Who's Online
1 registered (1 invisible) and 178 anonymous users online.
Top Posters
9608
s4s4u
9216
Whitworth
8556
jamesfromjersey
7641
wapitirod
7327
TCTex.
6244
KRal
5056
Gary
4971
Ernie
4704
Tigger
4433
pab1
4370
Dan B.
4078
Chance Weldon
4037
Gregg Richter
3910
Franchise
3755
johnwilliams
  Member Hunts
Handgun'n Black Be
Handgun'n Black Bear In Maine

Perseverance Pays
Perseverance Pays Off

   Access Requires Login

Generated in 0.04 seconds in which 0.011 seconds were spent on a total of 14 queries. Zlib compression enabled.




Copyright © 2000-2008
HandgunHunt.com, Inc.