Handgun Hunter Magazine - Forums: Converting Choate Ultimate Varmint to fit a XP-100

You are not logged in. [Log In] Handgun Hunter Magazine » Forums » Discussions » Shooters Bench » Converting Choate Ultimate Varmint to fit a XP-100

Page 1 of 1

Topic Options

Rate This Topic

#180211 - 04/13/17 06:14 PM

Converting Choate Ultimate Varmint to fit a XP-100

TXBRASS
member

Registered: 09/05/15
Posts: 109
Loc: TX

Offline

My buddy Mike is a magician in a machine shop and converted a standard Choate Ultimate Varmint stock designed to fit a Rem700 SA to now fit a XP100 that will be set-up as a rear grip rig.
Mike doesn't brag about his work, but it is second to none and I felt this project and the craftsmanship he put into it, should be documented and displayed for all to see. My hat is off to you Mike!

Cant wait to get it and get this project finalized, load development polished and see what she can do!

First he built a mock receiver that's longer than the stock to attach the bedding block to along with the front pillar.

Opened up stock for bedding block:

Devcon'd the bedding block into the stock:

Two 3/8" diameter cross pins through the bedding block and chassis:

Evened up ejection port contour on stock:

More to come in the next week or 2....

_________________________
Get your W-GEAR Guardian Scabbard. The only carry option built solely for use with specialty pistols!
100% MADE IN THE USA.
LIFETIME WARRANTY

http://www.codyweiser.com

- SHORT STICK BANG GANG -

Top

#180217 - 04/13/17 10:55 PM

Re: Converting Choate Ultimate Varmint to fit a XP-100 [Re: TXBRASS]

PsTaN
enthusiast

Registered: 07/18/15
Posts: 259
Loc: Alabama

Offline

Interesting. I have a Remington 700ML that I'd love to convert to Specialty Pistol. This would be part of that project.

_________________________
PsTaN

-Gen3 Glock 20
-Ruger Super Blackhawk Hunter
-Encore Pro Hunter

"Hold your horses, the elephants are coming, and out stamped Alabama"

Top

#180260 - 04/16/17 08:23 PM

Re: Converting Choate Ultimate Varmint to fit a XP-100 [Re: PsTaN]

TXBRASS
member

Registered: 09/05/15
Posts: 109
Loc: TX

Offline

Choate showed up yesterday so I got to work. Chopped her in all the right places to transition from a rifle stock to a Specialty Pistol rig.

Filled the voids in the grip and under the barrel channel with some brass bar stock, steel BB's, and a lot of Devcon.

Gr the bipod rail Devcon'd into place and once that was set, Devcon'd 2 bolts thru that, down thru the aluminum bedding block and into the brass bar.

Total weight of empty stock now is 5 pounds 6oz.

Top

#180269 - 04/17/17 09:56 AM

Re: Converting Choate Ultimate Varmint to fit a XP-100 [Re: TXBRASS]

karl
enthusiast

Registered: 01/12/15
Posts: 341
Loc: Minnesota

Offline

That should hold things tight. The guy who built the wood forend for my encore recommend against a bipod stud in that setup due to recoil. This looks like it should hold up well.

Top

#180313 - 04/18/17 05:56 PM

Re: Converting Choate Ultimate Varmint to fit a XP-100 [Re: karl]

TXBRASS
member

Registered: 09/05/15
Posts: 109
Loc: TX

Offline

finish work....

test fit...all is good!

Top

#180348 - 04/19/17 10:51 PM

Re: Converting Choate Ultimate Varmint to fit a XP-100 [Re: TXBRASS]

TXBRASS
member

Registered: 09/05/15
Posts: 109
Loc: TX

Offline

Top

#180452 - 04/23/17 11:56 PM

Re: Converting Choate Ultimate Varmint to fit a XP-100 [Re: TXBRASS]

TXBRASS
member

Registered: 09/05/15
Posts: 109
Loc: TX

Offline

Top

#180843 - 05/12/17 07:09 AM

Re: Converting Choate Ultimate Varmint to fit a XP-100 [Re: TXBRASS]

Bob Roach
addict

Registered: 03/02/10
Posts: 564
Loc: Missouri Ozarks

Offline

Somewhere I was reading another post where they used a Savage action on the build using a Choate Stock. As expensive as bolt action handgun stocks are, the Choate looks like a very good, and affordable option. Using a new action Remington 700 or Clone or a Savage should be even less work to get the Choate stock converted to specialty handgun.

Bob

_________________________
See You At The Range

Top